BDCDD12C

Model number: BDCDD12C

Also known as: BLACK+DECKER, BDCDD12C, BLACK+DECKER 12V Drill

• Black Decker Bdcdd12c Repair Manual

• The charger green LED does not flash, never becomes steady, or the battery remains discharged.

  The charger green LED does not flash, never becomes Unplug the charger and remove the battery before inspecting or FM-03

• Round bit will not grip

  Round bit will not grip Open, dry-clean, center, and hand-tighten the jaws through FM-08.

• The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.

  The trigger binds, the drill continues after release, or speed If the drill runs on, release it, center the direction button, and remove FM-05

• The drill makes abnormal grinding or knocking, vibrates strongly, or the chuck and spindle have play.

  The drill makes abnormal grinding or knocking, vibrates 1. Center-lock, remove the pack and bit, and hand-turn the empty chuck.

• The drill or battery becomes rapidly or severely hot, or little cooling air can move through the tool vents.

  The drill or battery becomes rapidly or severely hot, or 1. Stop, set the drill on a nonflammable surface, and remove the pack when safe.

• The LED work light does not light or stays on abnormally

  FM-12 THE LED WORK LIGHT DOES NOT LIGHT OR STAYS

• No LED or motor response

  No LED or motor response Prove charge, seating, center-lock position, contacts, and trigger through FM-01.

• A hand-tightened bit slips, visibly wobbles, or its tip runs off center when the drill turns.

  A hand-tightened bit slips, visibly wobbles, or its tip runs 1. Center-lock, remove the pack, and reject a bent or damaged bit.

• Charger green LED stays on

  Charger green LED stays on The pack is fully charged and may be used or left on the charger.

• Unit shuts off abruptly

  Unit shuts off abruptly Release, cool, recharge, and use FM-04 if abrupt stopping repeats.

• The battery will not slide in, click into place, release, or remain secure in the handle.

  The battery will not slide in, click into place, release, or Support the drill, press the release button, and never pry or force the FM-02

• THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY

  FM-01 THE DRILL WILL NOT START WITH A CHARGED KNOWN-GOOD BATTERY

• FM-09: FM-09 A SECURED BIT SLIPS, WOBBLES, OR RUNS OUT AT NO LOAD

  FM-09 A SECURED BIT SLIPS, WOBBLES, OR RUNS OUT AT NO LOAD

• FM-02: FM-02 THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE

  FM-02 THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE

• FM-14: FM-14 CHUCK, HOUSING, HANDLE, BATTERY MOUNT, OR VENTS ARE DAMAGED

  FM-14 CHUCK, HOUSING, HANDLE, BATTERY MOUNT, OR VENTS ARE DAMAGED

• FM-08: FM-08 THE KEYLESS CHUCK JAWS WILL NOT OPEN, CLOSE, RELEASE, OR GRIP

  FM-08 THE KEYLESS CHUCK JAWS WILL NOT OPEN, CLOSE, RELEASE, OR GRIP

• FM-11: FM-11 THE DRILL STALLS, BINDS, SHUTS DOWN, OR HAS LOW POWER

  FM-11 THE DRILL STALLS, BINDS, SHUTS DOWN, OR HAS

• FM-05: FM-05 THE TRIGGER STICKS, RUNS ON, OR SPEED RESPONSE IS UNSAFE

  FM-05 THE TRIGGER STICKS, RUNS ON, OR SPEED RESPONSE IS UNSAFE

• FM-15: FM-15 THE TOOL OR BATTERY OVERHEATS OR COOLING AIRFLOW IS BLOCKED

  FM-15 THE TOOL OR BATTERY OVERHEATS OR COOLING AIRFLOW IS BLOCKED

• FM-04: FM-04 RUNTIME IS VERY SHORT OR THE TOOL SHUTS OFF ABRUPTLY

  The drill runtime is very short or the tool shuts off abruptly during use, often without unusual heat.

• FM-16: FM-16 THE TOOL OR BATTERY HAS SMOKE, LIQUID, SWELLING, OR BURNING ODOR

  The tool or battery exhibits smoke, liquid leakage, swelling, melting, burning odor, or sparks, indicating a hazardous failure.

• FM-03: FM-03 THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE

  FM-03 THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE

• FM-07: FM-07 THE TORQUE COLLAR WILL NOT MOVE, HOLD, OR CONTROL CLUTCH SLIP

  The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.

• FM-01: No LED or motor response Prove charge, seating, center-lock position, contacts, and trigger through FM-01

  No LED or motor response Prove charge, seating, center-lock position, contacts, and trigger through FM-01.