Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Symptoms

The motor can be heard, but the front output remains still in both directions with the bit removed.
The motor runs normally, but the LED is dead, dim, or intermittent with trigger use.
The bit rotates, but no impact pulses begin when a correct fastener provides normal resistance.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The accessory catches or stops in the material and the tool reacts sharply in the hand.
WORKLIGHT COMES ON, BUT THE MOTOR WILL NOT START
NO WORKLIGHT OR MOTOR RESPONSE
A straight bit traces a visible circle at no load instead of rotating on a stable centerline.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
THE BATTERY OR CHARGER WILL NOT BEGIN OR COMPLETE A CHARGE
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
With the bit removed, the driver makes continuous abnormal grinding, knocking, or scraping.
At no load the motor starts, but speed has a dead band, surges, cuts out, or ignores trigger pressure.
A correct-looking bit will not enter fully or can be pulled out after the collar is released.

Failure Modes

part