Search repair guides

Find repair guides, manuals, symptoms, and error codes across the knowledge base.

Models

Manuals

Symptoms

The tool-free blade-clamp release lever will not reach full open or close securely.
The motor can be heard, but the front output remains still in both directions with the bit removed.
The direction lever will not reach forward, reverse, or center lock, or the selected position does not hold.
The battery will not slide fully into the handle, stay retained, or release normally.
The bit passed initial insertion, but backs out, falls free, or loses drive while the chuck body stays secure.
The trigger returns normally and power drops, but the anvil repeatedly coasts instead of stopping promptly.
The chuck jaws bind, will not release a bit, close unevenly, or cannot grip a straight round shank.
The battery will not slide in, click into place, release, or remain secure in the handle.
The blade leaves the line, flexes excessively, bends, or breaks during an otherwise controlled cut.
The drill runs steadily but drills slowly or cannot drive a normal fastener with correct setup.
THE BATTERY WILL NOT SEAT, LATCH, RELEASE, OR STAY SECURE
The trigger binds, the drill continues after release, or speed does not follow trigger pressure safely.
The collar pulls, but the bit will not come out, or a short/broken piece is recessed in the chuck.
The direction button jams, will not hold center lock, or the tool runs in only one direction.
The quick-release collar is stuck, has limited travel, or does not spring back after it is pulled.
The trigger binds or does not spring fully OFF, or the motor keeps running after the trigger is released.
The trigger lights the work area, but the motor stays silent and the quick-release chuck does not turn.
The torque collar binds, will not stay on a setting, or the clutch slips or locks at every position.
The drill or battery becomes rapidly or severely hot, or little cooling air can move through the tool vents.
Clamp lever will not travel

Failure Modes

part