Symptoms
Browse documented symptoms and jump into matching repair guides from search results.
The saw or pack smokes, leaks, sparks, melts, smells burned, swells, vents, or hisses.
0 related manuals
Find guides →
A charged pack is installed, but the trigger produces no worklight, motor sound, or anvil movement.
0 related manuals
Find guides →
A seated battery shows no charge response, or charge never reaches a usable full state.
0 related manuals
Find guides →
The pack will not slide fully, latch securely, or release normally.
0 related manuals
Find guides →
Runtime is much shorter than a matched known-good battery
0 related manuals
Find guides →
The chuck sleeve will not turn enough to move the jaws or admit a normal straight bit.
0 related manuals
Find guides →
With a charged pack installed and direction selected, the trigger produces no light, sound, or anvil movement.
0 related manuals
Find guides →
A charged, latched battery and normal lock-off and trigger command produce no blade stroke.
0 related manuals
Find guides →
Charging starts or stops when the battery is moved or held
0 related manuals
Find guides →
CHARGER BECOMES UNUSUALLY HOT OR WET, OR HAS BURNED TERMINALS
0 related manuals
Find guides →
The pack will not complete charging or delivers abnormally short light-duty runtime.
0 related manuals
Find guides →
A sound V20 battery is fully seated, the direction button is fully forward or reverse, and the tool gives no motor sound, LED response, or chuck motion. The dead state persists when the tool is held still.
0 related manuals
Find guides →
The blade turns, but the saw feeds poorly, stalls in the kerf, burns the wood, splinters excessively, or overloads during an ordinary cut.
0 related manuals
Find guides →
The saw cuts slowly, makes fine dust instead of chips, chatters in the kerf, or must be pushed hard despite judging sharpness.
0 related manuals
Find guides →
The correct battery is fitted, but pressing a lock-off button and the trigger produces no motor response.
0 related manuals
Find guides →
The reservoir contains oil but the chain stays dry, the primer gives no visible result, or the bar oil path remains dry.
0 related manuals
Find guides →
A secure straight bit and clear work do not eliminate harsh no-load sound or vibration.
0 related manuals
Find guides →
The cylinder pack stops before the normal seated position or requires abnormal force in a compatible Bosch 12V Max tool or approved charger.
0 related manuals
Find guides →
With the clamp lever working, a correct blade will not enter fully or fails the hand tug-check.
0 related manuals
Find guides →
The cool, fully charged pack starts a verified tool, then shuts it off during a brief no-load or light-load test.
0 related manuals
Find guides →